ZEKLER ZONE ELECTRO

Sun brim is easily mounted on the Zekler Zone safety helmet through its click mounts. Cannot be combined with visor.

Comfortable earmuffs with hard hat attachment for more demanding noisy enviroments. Good attenuation across medium, high and low frequencies. The hard hat attachment with fork-mount and the wide sealing cushions give a constant head presure and comfortable use. Helmet adapter prepared for mounting the Zekler visor system.

• Attenuation level: Level 2
• For hard hat attachment.
• Helmet adapter prepared for mounting the Zekler visor system.
• Wide, comfortable and easily replaced sealing cushions.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with EN 352-3. Attenuation value: H=31 M=27 L=19 SNR=29

Polycarbonate visor with quick-release mounts for Zekler Zone safety helmets (click mounts included). Complies with EN 166.

Earmuffs for safety helmet with Bluetooth.

• Built-in lithium-ion battery provides up to 55 hours and 100 hours standby on a single charge, USB charging.
• Built-in microphone for conversations in low-noise environments.
• Simple controls with glove-friendly buttons.
• SPT (Sound Protection Technology) limits sound in the speakers to a safe level of no more than 82 dB.
• Automatically power off after 4 hours of inactivity.
• USB charging cable included.
• Hearing protection equipped with 30 mm standard helmet mount, compatible with most helmets on the market, mounted in seconds.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with the PPE Directive 89/686 EEC, the PPE regulation 2016/425, EN 352-1, EN 352-8 and RED 2014/53/EU.

Filter sets: High = 31 M = 25 L = 19 SNR = 28

Comfortable earmuffs with hard hat attachment. Particularly good attenuation across medium and high frequencies. The hard hat attachment with fork-mount and the wide sealing cushions give a constant head presure and comfortable use. Especially suited in lower ambient noise level environments. Helmet adapter prepared for mounting the Zekler visor system.

• Attenuation level: Level 1
• For hard hat attachment.
• Helmet adapter prepared for mounting the Zekler visor system.
• Wide, comfortable and easily replaced sealing cushions.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with EN 352-3. Attenuation value: H=24 M=23 L=16 SNR=25

Frosted visor protection for the Zekler Zone safety helmet.

• Protects the visor when in the raised position.
• Grooves for a headlamp for easy combination of visor and headlamp.
• Compatible with the Zekler Zone Visor.
• Attaches to the helmet in the visor adapters.

• Replacement visor for Visor full face clear Zekler Zone
• Clear full-face visor in polycarbonate
• Treated for fog protection
• Optical class 1
• Resistant to impacts from small objects moving at speeds up to 120 m/s
• Approved according to ISO 16321-1:2021

• Replacement mesh visor for Visor full face mesh metal Zekler Zone
• Approved according to ISO 16321-3:2021

• Clear full-face visor made of polycarbonate
• Easy click installation with included click mounting system
• Anti-fog treated
• Optical class 1
• Resistant to impact from small objects moving at up to 120 m/s
• Resistant to droplets
• Fits Zekler Zone safety helmets
• Spare visor available as a spare part.
• Approved according to ISO 16321-1:2021

The visor is attached to a white Zekler Zone safety helmet in the photo.

• Metal mesh visor with good visibility and protection against debris
• Polycarbonate frame
• Easy click installation with included fasteners
• Fits Zekler Zone safety helmets
• Spare visor available as a spare part
• Approved according to ISO 16321-3:2021

The visor is attached to a white Zekler Zone safety helmet in the photo.

Comfortable ear cups for helmet attachment with integrated FM stereo radio, level-dependent monitoring and Bluetooth®. Music streaming and pauses and FM radio sound is lowered on incoming calls, however, for security reasons, the monitoring function is maintained. Good attenuation at low, high and mid frequency. The hard hat attachment with fork attachment and the wide sealing rings provide uniform headband pressure and comfortable use. The helmet adapter is prepared for attachment of Zekler visor system.

• Bluetooth®
• Boom microphone with highly effective noise suppression for clear and distinct communication even in very noisy environments.
• The "Side Tone" feature allows you to hear your voice clearly and distinctly and helps you speak at a normal speaking level even in environments with heavy noise.
• During incoming calls, monitoring is maintained for security reasons.
• The "Adaptive Volume Control" function automatically adjusts the volume on incoming phone calls based on the ambient sound level.
• FM stereo radio 88-108 MHz with sound level limiter (82dB(A)).
• The "Automatic Frequency Control" (AFC) function reduces the noise between radio stations when searching, locks and keeps the selected channel even in the event of poor reception conditions.
• Stereo/Mono Auto-switching for more stable sound, depending on reception conditions.
• Level-dependent monitoring Level dependent System amplifies weak sounds and lets you hear ambient sound while being protected against high impulse sounds.
• Attenuation level: Level 2.
• Equipped with 3.5 mm audio input.
• 2 x 3.5 mm stereo plug cable included.
• For attachment on a safety helmet.
• Wide, comfortable and easy replaceable sealing rings.
• Range up to 10 m to the connected Bluetooth® device.
• Comes with 2 pcs 1.5 V AA batteries.
• Rechargeable batteries (HR6 2100 mAh) and battery chargers are available as accessories. Charging approx. 3 h in wall socket and about 8 h in USB socket.
• Operating time up to 23 h with all functions active.
• Battery guard/Power saver for automatic shutoff if no settings have been set within 6 h.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with EN 352-1, 352-3, 352-4, 352-6, 352-8 and EMC Directive 2004/108/EC.

Filter sets: H = 33 M = 26 L = 19 SNR = 29

Komfortabelt hørselvern for hjelmmontasje med ekstra høy demping ved mellom og lave frekvenser.

• Dempingsnivå: Level 3.
• For montering på vernehjelm.
• Brede, komfortable og enkelt utbyttbare tetningsringer.

Hørselvernet er sertifisert for montering og bruk med alle Zekler vernehjelmer, samt med flere hjelmer fra Sundström, KASK, 3M Peltor, UVEX og Iris 2. En komplett liste over kompatible hjelmer finner du nederst under Nedlasting.

Samsvarer med EN 352-3. Dempingsverdier: H=32 M=29 L=21 SNR=31

Comfortable earmuffs for helmet attachment with built-in FM stereo radio and level-dependent monitoring.

• Attenuation level: Level 2.
• FM Stereo Radio 88-108 MHz with sound level limiter (80dB (A)).
• Level-dependent monitoring, Level Dependent System
• Equipped with 3.5 mm audio input.
• Cable 2x3, 5mm stereo plug included.
• 2 x 1.5 V AA batteries - running time approx 120 hours.
• For hard hat attachment.
• Hard hat adapter prepared for mounting the Zekler visor system.
• Wide, comfortable and easily replaceable sealing rings.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with EN 352-3, 352-4, 352-6, 352-8

Hearing protection for safety helmet, with Bluetooth, level dependent active listening and boom microphone.

• Built-in lithium-ion battery provides up to 55 hours and 100 hours standby on a single charge, USB charging.
• Boom microphone with advanced noise reduction for clear communication even in extremely noisy environments.
• Simple controls with glove-friendly buttons.
• SPT (Sound Protection Technology) limits sound in the speakers to a safe level of no more than 82 dB.
• Automatically power off after 4 hours of inactivity.
• USB charging cable included.
• Hearing protection equipped with 30 mm standard helmet mount, compatible with most helmets on the market, mounted in seconds.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with the PPE Directive 89/686 EEC, the PPE regulation 2016/425, EN 352-1, EN 352-8 and RED 2014/53/EU. Filter sets: High = 31 Medium = 26 L = 18 SNR = 29

Hearing protection for safety helmet, with high-quality wireless sound like headphones, without compromising on protection. Add level-dependent active listening and long battery life to give you all the freedom you need for a comfortable and safe working day.

• Built-in lithium-ion battery provides up to 55 hours and 100 hours standby on a single charge, USB charging.
• Built-in microphone for conversations in low-noise environments.
• Simple controls with glove-friendly buttons.
• SPT (Sound Protection Technology) limits sound in the speakers to a safe level of no more than 82 dB.
• Automatically power off after 4 hours of inactivity.
• USB charging cable included.
• Hearing protection equipped with 30 mm standard helmet mount, compatible with most helmets on the market, mounted in seconds.
• Noise-cancelling boom microphone available as an accessory for conversations in noisy environments.

The hearing protection is certified for mounting and use with all Zekler safety helmets, as well as with several helmets from Sundström, KASK, 3M Peltor, UVEX, and Iris 2. A complete list of compatible helmets can be found at the bottom under Downloads.

Complies with the PPE Directive 89/686 EEC, the PPE regulation 2016/425, EN 352-3, EN 352-8 and RED 2014/53/EU. Filter sets: High = 31 Medium = 26 L = 18 SNR = 28

• For lamps with a clamp
• Easy to assemble
• Strong adhesive tape

Shells are made of polycarbonate and are easily mounted on the Zekler Zone protective helmet. The shell is designed for extra visibility and intended for crane slinger. The shell also protects against contaminants that can adversely affect the helmet. The shell in the picture is mounted on a white Zekler Zone Standard.

• Helmet liner
• Fits well with the Zekler Zone safety helmet
• Senior size, one size
• Tight fit
• Material Polyester

Complete reflector kit for the Zekler Zone safety helmets. Pre-cut and easy to install.

Neck protector in hi-vis material for Zekler Zone safety helmets. Fasten with simple click mounts on the back of the helmet.

Flip-up polycarbonate visor for helmet mount.

• Highest optical class.
• Very good impact resistance.
• Fits all Zekler hearing protectors for helmet mounting.
• 30 mm wide bracket for mounting visor holders without Zekler hearing protection included.

Complies with EN 166, class 1B9, EN 1731, EN 352-1.